ARC Stick Electrode Accessories
361362911
Safety Electrode Holder 400A
with DIX70
A 200A electrode holder assembly that has a 3m 25mm² cable and DIX 25 connector for 150A-1 Phase Welding Inverter in Case.
PDS
SDoC
361362912
Safety Electrode Holder Twisty 400AMP
A safety electrode holder that can be used for electrode diameter 1.6-5.0mm.
PDS
SDoC
361362913
Safety Electrode Holder Uniking 600AMP
An electrode holder that can be used for electrode diameter 1.6-8.0mm.
PDS
SDoC
361362914
Safety Electrode Holder Twisty 200AMP
A safety electrode holder that can be used for electrode diameter 1.6-3.2mm.
PDS
SDoC
361362915
Return Clamp Assembly 400A with DIX70
400A return clamp assembly with DIX 70 connector, has a 50mm² 3m cable for use on 220A-1 Phase AC/DC Welding Inverter, on 320A-3 Phase Welding Inverter and on 500A-3 Phase Welding Inverter.
PDS
SDoC
361362916
Safety Electrode Holder 200A with DIX25 Connector
A 200A electrode holder assembly that has a 3m 25mm² cable and DIX 25 connector for 150A-1 Phase Welding Inverter in Case.
PDS
SDoC
361362917
Safety Electrode Holder 200A with DIX70 Connector
A 200A electrode holder assembly that has a 3m 35mm² cable and DIX 70 connector for 200A-3 Phase Welding Inverter.
PDS
SDoC
361362918
Return Clamp Assembly 200A with DIX25
200A return clamp assembly with DIX 25 connector, has a 25mm² 3m cable for use on 150A-1 Phase Welding Inverter in Case.
PDS
SDoC
361362919
Return Clamp Assembly 200A with DIX25
200A return clamp assembly with DIX 70 connector, has a 35mm² 3m cable. Earth return clamp should be connected as closest as possible to welding piece and not to the hull.
PDS
SDoC
361362921
Earthing Clamp 400A
400A clamp with jaw opening 70 mm.
PDS
SDoC
361362924
Earthing Clamp 800A
800A clamp with jaw opening 60 mm.
PDS
SDoC
361362920
Return Clamp Assembly 400A with Safety
A 400A return clamp assembly with safety connectors, that has a 3meters of 50mm² cable for use with safety connectors and built-in extension cables.
PDS
SDoC
361362922
Earthing Clamp 600A
600A clamp with jaw opening 70 mm.
PDS
SDoC
361362925
Safety Electrode Holder Air Carbon ARC Torch 600A
This torch can be used for air carbon arc gouging.
PDS
SDoC
361362931
Safety Electrode Holder 600A with Connector
A 400A electrode holder assembly that has 3m of super flexible 50mm² cable and safety connector extension.